3D-Printed Parts Disclosure

IMPORTANT NOTICE: PLEASE READ CAREFULLY

1. Inherent Manufacturing Risks:
• Material Strength: 3D-printed parts are manufactured using a layered additive process, which can result in inherent weaknesses. Unlike traditionally manufactured parts, 3D-printed components may have reduced tensile strength, especially along layer lines, which could make them more susceptible to breaking under stress or impact.
• Surface Quality: Due to the nature of 3D printing, parts may exhibit surface irregularities, such as roughness, layering artifacts, or small voids. These imperfections may affect the part's aesthetics, functionality, and durability.
• Temperature Sensitivity: Many 3D-printed materials, particularly plastics, may have lower heat resistance compared to other manufacturing processes. Prolonged exposure to high temperatures can cause warping, deformation, or failure of the part.
2. Small Parts and Children:
• Choking Hazard: 3D-printed parts that are small or have small components present a choking hazard and should be kept out of reach of children under the age of 3. If small parts detach or break off, they can pose significant risks if swallowed.
• Sharp Edges: Some 3D-printed parts may have sharp edges or points, which can cause injury if handled improperly. Extra caution should be taken when handling these parts, especially around children.
3. Use and Application Limitations:
• Not Suitable for Critical Applications: 3D-printed parts are not recommended for use in critical applications where part failure could result in injury, property damage, or significant financial loss. This includes, but is not limited to, mechanical load-bearing applications, high-impact scenarios, and applications involving extreme temperatures or chemicals.
• Limited Lifespan: The lifespan of 3D-printed parts may be shorter than that of traditionally manufactured components due to the factors mentioned above. Regular inspection and replacement of parts may be necessary to ensure ongoing safety and functionality.
4. User Responsibility:
• Inspection and Testing: It is the responsibility of the user to thoroughly inspect 3D-printed parts for any defects, weaknesses, or potential hazards before use. Testing the part under expected use conditions is recommended to identify any potential issues.
• Supervision Required: If 3D-printed parts are used in environments accessible to children, constant supervision is required to prevent accidental ingestion or injury.
5. Governing Law
• This Agreement is governed by and construed in accordance with the laws of New Hampshire in the United States of America, without regard to conflict of law principles.